Pneumatic Tire 4‑Wheel Sit‑Down Forklifts – Outdoor IC | 3,000–15,500 lb | CSA‑Certified Yard Forklifts
Specifications
| Condition | Refurbished |
| Part ID | CAT‑IC‑00006 |
| Capacity Range | 3,000–15,500 lb |
| Mast Specifications | 80"–300" |
| Mast Types | 2‑Stage • 3‑Stage • 4‑Stage • Truckers Mast |
| Supported Manufacturers | Toyota, Hyster, Yale, Crown, Komatsu, Nissan/UniCarriers, Clark, Linde |
| Attachments Available | Fork Positioners · Pipe Clamps · Lumber Forks · Paper Roll Clamps · Side‑Shifters · Rotators · Specialty Outdoor Attachments |
| Overhead Guard Options | Overhead Guard • Partial Cab • Full Cab |
| Tire Type | Pneumatic • Solid Pneumatic |
| Power Types | LP Gas (Propane) • Diesel • Gasoline • Natural Gas |
| Certifications | CSA‑Inspected • CSA‑Certified • MOL‑Ready • Export Documentation Provided |
| Service Area | GTA |
| Frequently Asked Questions (FAQ) | Q1: What are pneumatic tire forklifts used for? Pneumatic tire forklifts are designed for outdoor and mixed‑surface environments where traction, stability, and ground clearance matter. They perform best on gravel, asphalt, uneven yards, construction sites, lumber yards, and outdoor loading areas. Q2: What’s the difference between pneumatic and cushion tire forklifts? Pneumatic forklifts use air‑filled or solid pneumatic tires that absorb shock and handle rough terrain. Cushion forklifts use smooth rubber tires designed for indoor concrete. Pneumatic units are the correct choice when the work surface is uneven, wet, or outdoors. Q3: Are pneumatic forklifts suitable for indoor use? They can be used indoors, but they are optimized for outdoor work. Their larger tires and higher chassis may reduce maneuverability in tight indoor aisles. Most buyers choose them for yards, docks, and exterior material handling. Q4: What fuel types are available for pneumatic forklifts? Most pneumatic forklifts run on LPG or diesel. LPG is ideal for mixed indoor/outdoor use, while diesel is preferred for heavy outdoor applications, long duty cycles, and maximum torque. Q5: What capacities do pneumatic forklifts typically cover? Standard pneumatic forklifts range from 3,000 lb to 15,500 lb, with heavy‑duty models reaching 30,000 lb and beyond. They are built for lifting heavier loads in demanding outdoor environments. Q6: Why choose a pneumatic forklift over a rough‑terrain forklift? Pneumatic forklifts offer a balance of outdoor capability and warehouse versatility. Rough‑terrain forklifts are specialized for extreme off‑road conditions. Pneumatic units are the better choice for general yard work, loading docks, and industrial outdoor surfaces. Q7: Do pneumatic forklifts require special maintenance? They require regular tire inspections, proper inflation (for air‑filled tires), and routine engine maintenance depending on fuel type. Solid pneumatic tires reduce puncture risk and maintenance frequency. Q8: Are pneumatic forklifts CSA‑certified? Yes — all units listed through Premier Lift Equipment are CSA‑ready or CSA‑certified, ensuring compliance for Canadian industrial environments.. |
| Category Overview | Pneumatic tire IC forklifts are purpose‑built for outdoor industrial work where traction, torque, and durability determine productivity. This category centralizes all outdoor‑rated internal‑combustion units across the 3,000–15,500 lb range, helping buyers compare mast configurations, power types (LPG, diesel, gasoline, natural gas), and terrain‑specific performance. Use this page to evaluate equipment for lumber yards, steel distribution, construction sites, fabrication shops, and mixed‑surface yard operations requiring CSA‑aligned outdoor lifting capability. |
| Category Specifications (Range) | • Capacity: 3,000–15,500 lb • Mast heights: 80"–300" • Fork lengths: 42"–96" • Extensions: 60"–96" • Power: LP Gas / Diesel / Gasoline / Natural Gas • Tire type: Pneumatic (outdoor traction) • Applications: lumber yards, steel yards, construction sites, outdoor storage, fabrication shops • Operational priority: traction, torque, outdoor durability |
| SUBCATEGORY INDEX | Pneumatic Tire IC Forklifts include: |
| Mid‑Capacity Pneumatic Forklifts (3,000–6,000 lb) | General outdoor material handling for construction and fabrication. |
| High‑Capacity Pneumatic Forklifts (8,000–15,500 lb) | Steel, lumber, and bulk material handling with high torque. |
| Outdoor Yard & Mixed‑Terrain Forklifts | For gravel, asphalt, and uneven industrial surfaces. |
| Attachment‑Ready Outdoor IC Forklifts | Configured for clamps, pipe handling, lumber forks, and heavy‑duty attachments. |
| SAFETY STANDARDS & COMPLIANCE | All pneumatic tire IC forklifts in this category support CSA‑aligned safety and operational standards. Documentation and configuration options support: • CSA B335 industrial truck requirements • MOL visibility and pedestrian‑awareness protocols • Outdoor traction and stability guidelines • High‑capacity load‑handling safety • Operator‑protection and ergonomic controls • Cab options for weather protection Available compliance accessories include: • Blue lights • Red‑zone lights • Audible alarms • Bilingual safety signage • Weather‑proofing and outdoor visibility packages |
| COMPATIBILITY & USE CASES | Compatible Environments • Lumber yards • Steel yards • Construction sites • Fabrication shops • Outdoor storage yards • Industrial facilities Common Use Cases • Outdoor heavy‑duty lifting • Bulk material handling • Long‑distance yard travel • Mixed‑terrain maneuvering • High‑capacity pallet movement • Attachment‑based workflows |
| FLEET DEPLOYMENT & INTEGRATION | Pneumatic tire IC forklifts can be deployed across single facilities or multi‑site operations with standardized configurations. Programs include: • Outdoor yard optimization • High‑capacity fleet planning • Attachment integration and hydraulic setup • CSA documentation and inspection support • Export‑ready fleet preparation These solutions support consistent performance across outdoor industrial environments. |
| WHY THIS CATEGORY MATTERS | Pneumatic tire IC forklifts are essential for: • Maximum outdoor traction • High torque and lifting power • Mixed‑terrain stability • Continuous‑duty yard operations • CSA/MOL compliance • Lumber, steel, and construction workflows They deliver measurable ROI through increased productivity, reduced downtime, and reliable outdoor performance. |
| WHO THIS CATEGORY IS FOR | This category serves operations requiring outdoor IC lifting, including: • Lumber and building supply • Steel and metals distribution • Construction and fabrication • Outdoor storage facilities • Industrial yards |
| RELATED CATEGORIES | Rough Terrain Straight Mast Forklifts • Diesel Outdoor Forklifts • High‑Capacity Pneumatic Forklifts • 4‑Wheel Electric Pneumatic Forklifts • Warehouse Safety Equipment |
Description
Pneumatic tire 4‑wheel sit‑down forklifts are built for outdoor industrial work where traction, stability, and durability matter. With air‑filled or solid pneumatic tires, these units handle gravel, asphalt, concrete, yard surfaces, and uneven terrain while providing better shock absorption than cushion‑tire forklifts.
These forklifts are commonly used in lumber yards, steel and fabrication facilities, construction sites, outdoor storage yards, manufacturing plants, and logistics operations that require reliable performance in mixed‑surface environments.
Models typically range from 3,000–15,500 lb capacity, with internal‑combustion power options including propane (LPG), diesel, gasoline, and natural gas. Most units support a wide range of mast heights, fork lengths, side‑shift options, fork‑positioners, and specialty attachments for handling pallets, long loads, bulk materials, and outdoor inventory.
CSA‑certified units are available for operations that require compliant outdoor IC equipment under Canadian safety standards.
If you’re comparing tire types, pneumatic forklifts are ideal for outdoor traction and uneven ground, while cushion‑tire forklifts are optimized for smooth indoor floors.
“Not sure whether you need cushion or pneumatic tires? See our guide on forklift tire types explained.”
Related Insights for Forklift Buyers
- Buy Forklifts Across Borders | Trusted Delivery & Support
- Forklift Safety Rules Every Operator Must Know
For related equipment, explore our other categories:
Equipment Compliance & Quality
Every unit represented by Premier Lift Equipment is evaluated through a structured inspection process focused on structural integrity, operational performance, and component wear. Equipment is prepared in alignment with CSA/MOL safety expectations, OEM‑recommended inspection standards, and the operational requirements of warehousing, manufacturing, 3PL, cold storage, and broader industrial environments.
Our intake and reconditioning workflow verifies specifications, features, and performance details for accuracy. Supporting documentation — including service records, battery health reports, and certification history — is available upon request to assist with compliance, audit readiness, and operational planning.
Specifications are believed accurate but not guaranteed. Variations may occur based on configuration or prior modifications. Buyers are responsible for verifying all critical details before purchase. Need a delivered price or compliance package? Request a delivered quote for fast turnaround across Canada.